#
# Resource backup , created Fri Apr 20 15:32:38 CEST 2018
#
#---------------------------------------------------------
# SERVER accessconf-srv/bsh_eehg, AccessConf device declaration
#---------------------------------------------------------
accessconf-srv/bsh_eehg/DEVICE/AccessConf: "slu/interlock/bsh_eehg.01",\
"slu/interlock/sh_eehg.01"
# --- slu/interlock/bsh_eehg.01 properties
slu/interlock/bsh_eehg.01->Attr_config_file: ""
slu/interlock/bsh_eehg.01->Attr_config_prop: #,\
"#attr:Plc_status:0:state:0:plc_state:check if low level server state = ON",\
#,\
"attr:ValveStat:0:Stat_image:92.0:BSH_EEHG_OPN:Beam stopper sicuramente aperto",\
"attr:ValveStat:1:Stat_image:92.4:BSH_EEHG_CLD:Beam stopper sicuramente chiuso",\
attr:ValveStat:2:Stat_image:0.0:spare:spare,\
attr:ValveStat:3:Stat_image:0.0:spare:TODO(CUTOFF),\
attr:ValveStat:4:Stat_image:0.0:spare:spare,\
"attr:ValveStat:5:Stat_image:157.0:ERR_BSH_EEHG_OPN:Controllo Hardware ingresso fail safe",\
"attr:ValveStat:6:Stat_image:157.4:ERR_BSH_EEHG_CLD:Controllo Hardware ingresso fail safe",\
"attr:ValveStat:7:Stat_image:156.6:ERR_BSH_EEHG_INTCK_ABI:Controllo Hardware ingresso fail safe",\
"attr:ValveStat:8:Stat_image:36.7:BSH_EEHG_OK_CONT:controllo incollaggio contatti ok",\
"attr:ValveStat:9:Stat_image:36.6:BSH_EEHG_NO_ERR_OPN:controllo errore in apertura ok",\
"attr:ValveStat:10:Stat_image:36.5:BSH_EEHG_NO_ERR_CLD:controllo errore in chiusura ok",\
#,\
"attr:Errors:5:Stat_image:157.0:ERR_BSH_EEHG_OPN:Controllo Hardware ingresso fail safe",\
"attr:Errors:6:Stat_image:157.4:ERR_BSH_EEHG_CLD:Controllo Hardware ingresso fail safe",\
"attr:Errors:7:Stat_image:156.6:ERR_BSH_EEHG_INTCK_ABI:Controllo Hardware ingresso fail safe",\
"attr:Errors:8:Stat_image:36.7:BSH_EEHG_OK_CONT:controllo incollaggio contatti ok",\
"attr:Errors:9:Stat_image:36.6:BSH_EEHG_NO_ERR_OPN:controllo errore in apertura ok",\
"attr:Errors:10:Stat_image:36.5:BSH_EEHG_NO_ERR_CLD:controllo errore in chiusura ok",\
#,\
"attr:AbiGroup:0:Stat_image:13.6:BSH_EEHG_ABI:beam shutter EEHG abilitato da Accessi Laser",\
"attr:AbiGroup:1:Stat_image:94.6:BSH_EEHG_INTCK_ABI:beam shutter EEHG abilitato da INTCK",\
#,\
cmd:open:Send_cmd:102:72.0,\
cmd:close:Send_cmd:102:74.0,\
#
slu/interlock/bsh_eehg.01->Low_level_srv: "slu/interlock/plc_slu.01"
slu/interlock/bsh_eehg.01->__SubDevices: "slu/interlock/plc_slu.01"
# --- slu/interlock/bsh_eehg.01 attribute properties
slu/interlock/bsh_eehg.01/AbiGroup->comments: "13.6 - beam shutter EEHG abilitato da Accessi Laser",\
"94.6 - beam shutter EEHG abilitato da INTCK"
slu/interlock/bsh_eehg.01/AbiGroup->labels: BSH_EEHG_ABI,\
BSH_EEHG_INTCK_ABI
slu/interlock/bsh_eehg.01/AbiGroup->positions: "slu/interlock/plc_slu.01/Stat_image[110]",\
"slu/interlock/plc_slu.01/Stat_image[758]"
slu/interlock/bsh_eehg.01/Errors->comments: "157.0 - Controllo Hardware ingresso fail safe",\
"157.4 - Controllo Hardware ingresso fail safe",\
"156.6 - Controllo Hardware ingresso fail safe",\
"36.7 - controllo incollaggio contatti ok",\
"36.6 - controllo errore in apertura ok",\
"36.5 - controllo errore in chiusura ok"
slu/interlock/bsh_eehg.01/Errors->labels: ERR_BSH_EEHG_OPN,\
ERR_BSH_EEHG_CLD,\
ERR_BSH_EEHG_INTCK_ABI,\
BSH_EEHG_OK_CONT,\
BSH_EEHG_NO_ERR_OPN,\
BSH_EEHG_NO_ERR_CLD
slu/interlock/bsh_eehg.01/Errors->positions: "slu/interlock/plc_slu.01/Stat_image[1256]",\
"slu/interlock/plc_slu.01/Stat_image[1260]",\
"slu/interlock/plc_slu.01/Stat_image[1254]",\
"slu/interlock/plc_slu.01/Stat_image[295]",\
"slu/interlock/plc_slu.01/Stat_image[294]",\
"slu/interlock/plc_slu.01/Stat_image[293]"
slu/interlock/bsh_eehg.01/ValveStat->comments: "92.0 - Beam stopper sicuramente aperto",\
"92.4 - Beam stopper sicuramente chiuso",\
"0.0 - spare",\
"0.0 - TODO(CUTOFF)",\
"0.0 - spare",\
"157.0 - Controllo Hardware ingresso fail safe",\
"157.4 - Controllo Hardware ingresso fail safe",\
"156.6 - Controllo Hardware ingresso fail safe",\
"36.7 - controllo incollaggio contatti ok",\
"36.6 - controllo errore in apertura ok",\
"36.5 - controllo errore in chiusura ok"
slu/interlock/bsh_eehg.01/ValveStat->labels: BSH_EEHG_OPN,\
BSH_EEHG_CLD,\
spare,\
spare,\
spare,\
ERR_BSH_EEHG_OPN,\
ERR_BSH_EEHG_CLD,\
ERR_BSH_EEHG_INTCK_ABI,\
BSH_EEHG_OK_CONT,\
BSH_EEHG_NO_ERR_OPN,\
BSH_EEHG_NO_ERR_CLD
slu/interlock/bsh_eehg.01/ValveStat->positions: "slu/interlock/plc_slu.01/Stat_image[736]",\
"slu/interlock/plc_slu.01/Stat_image[740]",\
"slu/interlock/plc_slu.01/Stat_image[0]",\
"slu/interlock/plc_slu.01/Stat_image[0]",\
"slu/interlock/plc_slu.01/Stat_image[0]",\
"slu/interlock/plc_slu.01/Stat_image[1256]",\
"slu/interlock/plc_slu.01/Stat_image[1260]",\
"slu/interlock/plc_slu.01/Stat_image[1254]",\
"slu/interlock/plc_slu.01/Stat_image[295]",\
"slu/interlock/plc_slu.01/Stat_image[294]",\
"slu/interlock/plc_slu.01/Stat_image[293]"
# --- slu/interlock/sh_eehg.01 properties
slu/interlock/sh_eehg.01->Attr_config_file: ""
slu/interlock/sh_eehg.01->Attr_config_prop: #,\
"#attr:Plc_status:0:state:0:plc_state:check if low level server state = ON",\
#,\
"attr:ValveStat:0:Stat_image:82.0:SH_EEHG_OPN:Beam stopper sicuramente aperto",\
"attr:ValveStat:1:Stat_image:82.4:SH_EEHG_CLD:Beam stopper sicuramente chiuso",\
attr:ValveStat:2:Stat_image:0.0:spare:spare,\
attr:ValveStat:3:Stat_image:0.0:spare:TODO(CUTOFF),\
attr:ValveStat:4:Stat_image:0.0:spare:spare,\
"attr:ValveStat:5:Stat_image:158.0:ERR_SH_EEHG_OPN:Controllo Hardware ingresso fail safe",\
"attr:ValveStat:6:Stat_image:158.3:ERR_SH_EEHG_CLD:Controllo Hardware ingresso fail safe",\
attr:ValveStat:7:Stat_image:0.0:spare:spare,\
"attr:ValveStat:8:Stat_image:37.7:SH_EEHG_OK_CONT:controllo incollaggio contatti ok",\
"attr:ValveStat:9:Stat_image:37.6:SH_EEHG_NO_ERR_OPN:controllo errore in apertura ok",\
"attr:ValveStat:10:Stat_image:37.5:SH_EEHG_NO_ERR_CLD:controllo errore in chiusura ok",\
#,\
"attr:Errors:0:Stat_image:158.0:ERR_SH_EEHG_OPN:Controllo Hardware ingresso fail safe",\
"attr:Errors:1:Stat_image:158.3:ERR_SH_EEHG_CLD:Controllo Hardware ingresso fail safe",\
"attr:Errors:2:Stat_image:37.7:SH_EEHG_OK_CONT:controllo incollaggio contatti ok",\
"attr:Errors:3:Stat_image:37.6:SH_EEHG_NO_ERR_OPN:controllo errore in apertura ok",\
"attr:Errors:4:Stat_image:37.5:SH_EEHG_NO_ERR_CLD:controllo errore in chiusura ok",\
#,\
"attr:AbiGroup:0:Stat_image:14.6:SH_EEHG_ABI:beam shutter (VLV) EEHG abilitato da Accessi Laser",\
attr:AbiGroup:1:Stat_image:0.0:spare:spare,\
#,\
cmd:open:Send_cmd:102:76.0,\
cmd:close:Send_cmd:102:78.0,\
#
slu/interlock/sh_eehg.01->Low_level_srv: "slu/interlock/plc_slu.01"
slu/interlock/sh_eehg.01->__SubDevices: "slu/interlock/plc_slu.01",\
"dserver/plcslu-srv/slu"
# --- slu/interlock/sh_eehg.01 attribute properties
slu/interlock/sh_eehg.01/AbiGroup->comments: "14.6 - beam shutter (VLV) EEHG abilitato da Accessi Laser",\
"0.0 - spare"
slu/interlock/sh_eehg.01/AbiGroup->labels: SH_EEHG_ABI,\
spare
slu/interlock/sh_eehg.01/AbiGroup->positions: "slu/interlock/plc_slu.01/Stat_image[118]",\
"slu/interlock/plc_slu.01/Stat_image[0]"
slu/interlock/sh_eehg.01/Errors->comments: "158.0 - Controllo Hardware ingresso fail safe",\
"158.3 - Controllo Hardware ingresso fail safe",\
"37.7 - controllo incollaggio contatti ok",\
"37.6 - controllo errore in apertura ok",\
"37.5 - controllo errore in chiusura ok"
slu/interlock/sh_eehg.01/Errors->labels: ERR_SH_EEHG_OPN,\
ERR_SH_EEHG_CLD,\
SH_EEHG_OK_CONT,\
SH_EEHG_NO_ERR_OPN,\
SH_EEHG_NO_ERR_CLD
slu/interlock/sh_eehg.01/Errors->positions: "slu/interlock/plc_slu.01/Stat_image[1264]",\
"slu/interlock/plc_slu.01/Stat_image[1267]",\
"slu/interlock/plc_slu.01/Stat_image[303]",\
"slu/interlock/plc_slu.01/Stat_image[302]",\
"slu/interlock/plc_slu.01/Stat_image[301]"
slu/interlock/sh_eehg.01/ValveStat->comments: "82.0 - Beam stopper sicuramente aperto",\
"82.4 - Beam stopper sicuramente chiuso",\
"0.0 - spare",\
"0.0 - TODO(CUTOFF)",\
"0.0 - spare",\
"158.0 - Controllo Hardware ingresso fail safe",\
"158.3 - Controllo Hardware ingresso fail safe",\
"0.0 - spare",\
"37.7 - controllo incollaggio contatti ok",\
"37.6 - controllo errore in apertura ok",\
"37.5 - controllo errore in chiusura ok"
slu/interlock/sh_eehg.01/ValveStat->labels: SH_EEHG_OPN,\
SH_EEHG_CLD,\
spare,\
spare,\
spare,\
ERR_SH_EEHG_OPN,\
ERR_SH_EEHG_CLD,\
spare,\
SH_EEHG_OK_CONT,\
SH_EEHG_NO_ERR_OPN,\
SH_EEHG_NO_ERR_CLD
slu/interlock/sh_eehg.01/ValveStat->positions: "slu/interlock/plc_slu.01/Stat_image[656]",\
"slu/interlock/plc_slu.01/Stat_image[660]",\
"slu/interlock/plc_slu.01/Stat_image[0]",\
"slu/interlock/plc_slu.01/Stat_image[0]",\
"slu/interlock/plc_slu.01/Stat_image[0]",\
"slu/interlock/plc_slu.01/Stat_image[1264]",\
"slu/interlock/plc_slu.01/Stat_image[1267]",\
"slu/interlock/plc_slu.01/Stat_image[0]",\
"slu/interlock/plc_slu.01/Stat_image[303]",\
"slu/interlock/plc_slu.01/Stat_image[302]",\
"slu/interlock/plc_slu.01/Stat_image[301]"
#---------------------------------------------------------
# CLASS AccessConf properties
#---------------------------------------------------------
CLASS/AccessConf->cvs_location: "/home/cvsadm/cvsroot/fermi/servers/accessconf/src/"
CLASS/AccessConf->cvs_tag: release_08
CLASS/AccessConf->Description: ""
CLASS/AccessConf->doc_url: "http://www.esrf.eu/computing/cs/tango/tango_doc/ds_doc/"
CLASS/AccessConf->InheritedFrom: Device_Impl
CLASS/AccessConf->ProjectTitle: "Storage Ring Access"
# --- dserver/accessconf-srv/bsh_eehg properties
dserver/accessconf-srv/bsh_eehg->__SubDevices: "tmp/log/srv-admin-srf@22"