diff --git a/laser.conf b/laser.conf
new file mode 100644
index 0000000000000000000000000000000000000000..b1fadba877d95ba95d06a119507fe98245e61047
--- /dev/null
+++ b/laser.conf
@@ -0,0 +1,296 @@
+#EXPERT
+Laser Tools
+
+@HEADING
+Laser Tools
+
+@GTOOL
+Measure Correlation of Devices
+export PYTHONPATH=${HOME}/runtime/panels/bin/correlatorMonitor; cd /home/lfo/runtime/panels/bin/correlatorMonitor; ./main.py
+E. Ferrari
+Trend & correlations
+expert
+
+
+@GTOOL
+Cross Correlation Software
+python3 /home/lfo/devel/fermi/panels/laser/XCorrUNIV/interfaccia.py
+python
+universal interface CrossCorrelator
+
+@GTOOL
+CCD comulative set reference
+python /home/lfo/python/CCD_set_reference/sfaticamento.py
+python
+shows ccd with bad reference and allows to correct it
+
+@GTOOL
+I0 monitor
+export PYTHONPATH=/home/lfo/bin/python/toolbox; cd /home/lfo/python/fel_intensity_monitor; ./main.py
+Python
+I0 monitor versione "Lars"
+
+@GTOOL
+SEED CALENDAR
+python /home/lfo/runtime/panels/bin/slcalendarpanel.py
+Python
+manage seed calendar
+
+@GTOOL
+SLU CALENDAR
+python /home/lfo/runtime/panels/bin/slucalendarpanel.py
+Python
+manage slu calendar
+
+@GTOOL
+CorrIRXCorr
+python /home/lfo/devel/fermi/panels/laser/seedampltimingcorrelator.py
+python
+seed IR XCorr1 Vs seed IR XCorr2
+
+@HEADING
+HDB
+
+@GTOOL
+HDB++ MANAGER
+python /home/lfo/runtime/panels/bin/hdbcheckarchiviatore.py
+Python
+manage archiver strategy
+
+@GTOOL
+HDB++ plot data
+python /home/lfo/runtime/panels/bin/hdbinterfaccia.py
+Python
+An alternative to eGiga
+
+@GTOOL
+HDB++ create or modify list
+python /home/lfo/runtime/panels/bin/hdblisteinterfaccia.py
+Python
+create or modify attribute list for HDB
+
+@HEADING
+Injector
+
+@GTOOL
+CCD Energy Trend
+python /home/lfo/utenti/paoloc/energymeterccd.py 
+python
+Show energy trend from ccd
+
+@RTOOL
+PIL attenuator calibration
+/home/lfo/MatlabScripts/MeasureAndPlot_PIL_EnergyVsAttenuator.m
+MATLAB
+measure and plot energy Vs rots (0,359 deg)
+
+@RTOOL
+Laser Beam Quality
+/home/lfo/MatlabScripts/PIL_SPATIAL/GUI_FRM_PIL_spatial.m
+MATLAB
+Laser beam quality analysis
+
+@RTOOL
+Acquire & analyze Mira spectrum
+/home/lfo/MatlabScripts/analisi_spettri_mira/programma_finito/ghostbuster1.m
+MATLAB
+Acquire & analyze Mira spectrum
+
+@GTOOL
+PIL Energy Trend
+python /home/lfo/python/PIL/PIL_energy_trend.py
+python
+Show energy trend from ccd5
+
+
+@HEADING
+Heater
+
+@RTOOL
+LH attenuator calibration
+/home/lfo/MatlabScripts/MeasureAndPlot_LH_EnergyVsAttenuator.m
+MATLAB
+measure and plot energy Vs rots (0,359 deg)
+
+
+@HEADING
+Seed
+
+@GTOOL
+Check bn operation of seed UV spectrometer
+python /home/lfo/devel/fermi/panels/laser/checkSLuvSPECTRUM_rt.py
+python
+plot data_x, data_x bunch number, data_y, data_y bunch number
+
+@GTOOL
+save seed UV spectrometer data
+python /home/lfo/devel/fermi/panels/laser/saveSLuvSPECTRUM.py
+python
+save data_x, data_y in /home/lfo/data/seedUVspctm/
+
+@GTOOL
+Decimator panel
+/runtime/bin/sl-decimators-gui
+python
+not fully tested interface for decimators
+
+@GTOOL
+Double THG find 0
+python /home/lfo/devel/fermi/panels/laser/seed2thg_findzero.py
+python
+move trls, read gentec, show scan plot
+
+@GTOOL
+SEED monitor panel
+python /home/lfo/runtime/panels/bin/slmonitorpanel.py
+Python
+Monitor main parameter of SEED system
+
+@GTOOL
+XPS single axis panel
+python /home/lfo/python/SEED/motor.py
+python
+A panel for XPS motors
+
+@RTOOL
+Seed Energy Calibration
+/home/lfo/MatlabScripts/SEC.m
+MATLAB
+help in calibrating the seed - on-line  energy monitoring diode: "Phd" to the off-line Energy meter 'PYR'
+
+@RTOOL
+Write Seed Energy Calibration
+/home/lfo/MatlabScripts/WriteCalibration.m
+MATLAB
+Write 23-nov-2012_Phd-calibr_.txt calibration in emcalib_sl.01
+
+@RTOOL
+Aquire PAM RT
+/home/lfo/MatlabScripts/acquirePAMrt.m
+MATLAB
+acquire pam data (2channels) at 10/50Hz with bcn
+
+@RTOOL
+SEED vitrual fidelity
+/home/lfo/MatlabScripts/misure_pointing/pointingseed.m
+MATLAB
+measure pointing on virtual undulator Vs undulator screen(s)
+
+@HEADING
+EEHG
+
+@GTOOL
+launch laser controll panel
+python /home/lfo/devel/fermi/panels/laser/eehg/sleehg.py
+python
+Panel to control and montitor laser paramenters for EEHG
+
+@GTOOL
+UV xcorr gentec
+python /home/lfo/devel/fermi/panels/laser/eehg/ssuvxcorr.py
+python
+single shot UV crosscorrelator based on 2 gentec em
+
+@HEADING
+SLU
+
+@GTOOL
+Monitor panel new
+python3 /home/lfo/utenti/paoloc/dagit/SluSourceMonitor_next.py
+python
+New version of source monitor panel
+
+@GTOOL
+LDM CCD9 Energy Trend
+python /home/lfo/utenti/paoloc/LDMenergymeterccd.py 
+python
+Show energy trend from ccd
+
+@GTOOL
+LDM_Gentec_Ch2
+/runtime/bin/gentec_energymeter srv-ldm-srf:20000/ldm/energy_meter/ems_slu_ldm.02 -title LDM_Gentec_Ch2
+controls
+LDM gentec channel2
+
+@GTOOL
+SLU source monitor
+/runtime/bin/slu-source-monitor-gui
+Python
+monitor panel for SLU
+
+@GTOOL
+Decimator panel V1
+/runtime/bin/sl-decimators-gui
+python
+not fully tested interface for decimators
+
+@GTOOL
+SLU Delay calculator
+/runtime/bin/slu-delay-calculator-gui
+Python
+Manage Slu and Seed Delay
+
+@GTOOL
+SLU estimated ENERGY
+python /home/lfo/runtime/panels/bin/sluenergyest.py
+Python
+Panel for SLU input energy
+
+@GTOOL
+SLU trls PI totem
+python /home/lfo/python/SLU/test_mercury_totem.py
+python
+panel for PI trls on totem
+
+@GTOOL
+DIPROI msecond delay
+python /home/lfo/devel/fermi/panels/laser/slucommands/triggermillidelay.py
+python
+panel for PI trls on totem
+
+@GTOOL
+LDM SMC100 panel
+python /home/lfo/devel/fermi/panels/laser/slucommands/ldm_smc100panel.py
+python
+Interface for Newport smc100 motor
+
+@GTOOL
+LDM ELITE2 LASER TRIGGER SWITCH
+python /home/lfo/devel/fermi/panels/laser/tmp_ldm_trigger_switch.py
+python
+Switch trigger for elite2 between dalay for camera and delay for slu
+
+@HEADING
+Miscellaneous
+
+@YTOOL
+Save & Restore
+unset LD_LIBRARY_PATH; /runtime/fermi/panels/bin/saverestore
+?
+Save & restore accelerator parameters
+
+@RTOOL
+MATLAB Scan Tool
+/home/fermi/devel/utils/matlab/scantool/scantool.m
+L. Froehlich
+Scan any Tango property while recording others (experimental)
+
+@RTOOL
+MATLAB Make movie
+/home/fermi/devel/utils/matlab/bunch_numb_tools/MovieMakerGui.m
+M. Trovo'
+Create an avi movie from the screen images.
+
+@YTOOL
+QLogger
+/runtime/bin/qlogger
+G. Strangolino
+Log Tango properties to a file and plot histories
+
+@EXPERTTOOL
+Lock timing links
+/home/fermi/home/fabio/machine_files/pulsed_autolock/start.m
+F. Rossi
+Crosscorrelation-based relock of pulsed optical timing links
+expert
+